Keeping water out of your home is quite a tricky business – plumbing problems often cause excessive moisture, tiny rain drops easily find their way in through small cracks in the foundation, the roof, or the walls of your house, etc. And though a few drops don’t seem to cause any harm, the excess water will quickly penetrate the porous materials in your home, resulting in severe structural damage, mold growth, and other humidity problems. Therefore, to prevent water damage to your property, you need to waterproof your home – take proper care of any house leaks and plumbing issues you have, seal gaps around doors and windows, add proper insulation, etc. The best part is that you’ll not only prevent water from damaging your property, but will also cut down on your energy bills in the winter.
All you need to do is effectively leak proof your home.
Waterproof the Roof
The excellent condition of your roof is the main prerequisite for a waterproof home. To make sure that your shelter will withstand even the most adverse weather conditions without letting a single drop of water inside, you are recommended to:
Inspect and Repair the Roof
Have your roof carefully inspected during the first months of autumn to have enough time for any necessary repair work before the snow falls. Replace any broken tiles and have loose or misplaced ones properly fixed to avoid roof leaks and severe water damage.
Inspect and Repair the Chimney
If the flashing (the sheet metal that keeps the intersection between the chimney and roof watertight) is cracked, loose, or missing, water will easily leak around the chimney and get into your home, causing a variety of problems. So, invest in quality flashing and don’t forget to put a cap over your chimney (unless it already has one).
Add Attic Insulation
Proper insulation will help maintain both the temperature and the moisture level in your surroundings at an optimal level, considerably increasing the energy efficiency of your home and keeping it waterproof.
Clean the Gutters
Leaves and debris can block the drains and the downspout, preventing water from draining from the roof. To avoid this problem, you need to clean the eaves, troughs, and the drainpipes once in a while – remove dead leaves and branches from the shingles, scoop debris from the gutters, wash small debris down the downspout with a garden hose, and make provisions for the water to drain away from the house walls.
Have in mind that water pooling in the gutters means that the downspout is clogged and urgent measures are required in order to prevent water from spilling over (as it has nowhere to go) and running down the wall, causing excessive dampness and, possibly, internal leaks.
Needless to say, you should regularly inspect the gutters and the drainpipes, and timely replace damaged or rusty ones.
Once you have eliminated the possibility of a leaky roof, you need to turn your attention to other potential ways in which water can infiltrate your home.
Waterproof the Foundations
As already mentioned, even the smallest cracks in your foundation walls can let water inside. So, in order to avoid basement flooding and water damage to your property, you need to effectively waterproof the foundations:
- Repair cracks – Inspect the foundation walls for cracks and address them before excess water from torrential rains or heavy snow has had the time to get inside and cause structural damage. Small cracks can be sealed with caulk designed to repair masonry. Larger gaps should be fixed with the help of hydraulic cement – an excellent leak-proofing material that will effectively keep water away;
- Direct water away from the foundations – Make sure the grading around your house slopes away from the foundations (adding several inches of crushed stone or topsoil around the foundation once a year will do the trick). This way, water will drain away from your house, causing no catch basins may also help keep water off the foundations – you can dig a U-shaped trench or a cylindrical well in the lowest part of your property to collect excess water. Line the walls of the basin with fabric, fill it with gravel, and keep it free of debris.
Last but not least, make sure that all the openings for pipes, wires, and duct work in the roof area and underneath your home are well sealed. Also, check for gaps where pipes and air conditioning ducts pass through the walls and take adequate measures to fix the leaks (if any).
Sealing your home, however, will not be efficient enough unless you seal the doors and windows, too.
Leak-Proof Doors and Windows
Snow and rain can easily get inside through badly-fitting doors or windows, especially when strong wind is blowing against the side of your home. To waterproof doors and windows you are advised to:
- Apply caulk on both sides of the window to prevent water from seeping inside;
- Use weather-stripping to seal doors and windows that don’t close tightly;
- Fit a keyhole cover in front of door locks to keep rainwater and snow outside;
- Install storm windows to provide an additional layer of protection against rain and snow.
Sealing doors and windows will not only help keep water away from your home, but it will also considerably improve the thermal efficiency of your property.
By following the above tips, you’ll be able to effectively weatherproof your home, thus reducing the risk of water damage problems and lowering your utility bills. Home water damage, however, may also be caused by leaky pipes and fixtures. So, in order to completely eliminate the possibility of water damage to your property you need to prevent plumbing problems as well.
Take Care of the Pipes
As the old adage goes, “An ounce of prevention is worth a pound of cure”. So, inspect the plumbing system in your home on a regular basis and maintain it in a good condition to avoid problems. Should the pipes leak and cause water damage, the restoration works will cost you a lot of headaches, time, and money, so take all the necessary precautions to prevent it from happening – replace damaged or rusty pipes and valves as soon as you notice the problem and protect them properly during the cold months:
- Disconnect the downspouts from the sewer system whenever possible to forestall back-up of waste water. Also, don’t forget to disconnect the garden hose and to blow out your sprinkler system before the winter comes;
- Wrap the pipes with heat tape to prevent them from freezing and bursting. You can set the built-in thermostat at the desired temperature to keep your pipes warm, regardless of the weather conditions outside;
- Add insulation to the pipes to provide an extra layer of protection against the winter cold;
- Seal air leaks and insulate the areas of your home where water pipes run to keep frigid air away;
- Let a few faucets drip whenever the outside temperatures fall below zero. The running water, especially if warm, will not allow the pipes to freeze;
- If you will be away for more than a couple of days, take adequate measures to prevent the pipes from freezing while you are not home – shut off the main water supply, leave the heating on low, keep the heat tape thermostat to 55 degrees or higher, make sure the warm air can circulate around the pipes, etc.
The efficiency of different leak proofing methods depends on several specific factors – climatic conditions in the area, quality of the building materials and the construction work, condition of the existing plumbing system, efficiency of the HVAC system, air tightness of the building, etc. Home waterproofing, however, is certain to save you from a lot of trouble, whatever the specific circumstances in your case, so it should be among your top priorities.
Get Water Damage Restoration Help
If water still leaks inside despite your efforts, call water damage cleanup and restoration professionals at the first signs of water damage in your home – they will handle the problem in a quick and efficient manner and will give you practical tips on how to best leak proof your house.
You should never hesitate to call a water damage restoration professional, even for minor leaks, because the water will spread and make the damage worse.